1 / 3
Suporte Curvo para Lápis de Cores | Ergonomic Curved Color Pencil & Desk Organizer — zdjęcie 1
1 / 3

Suporte Curvo para Lápis de Cores | Ergonomic Curved Color Pencil & Desk Organizer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Um organizador de mesa moderno, funcional e minimalista com perfil curvo, projetado para exibir e organizar lápis de cor

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

# ✏ Ergonomic Curved Pencil & Desk Organizer | Suporte Curvo para Lápis de Cores

A modern, functional, and minimalist curved desk organizer designed to display and organize colored pencils, pens, brushes, or markers while saving desk space.

Um organizador de mesa moderno, funcional e minimalista com perfil curvo em "U/V", projetado para exibir e organizar lápis de cor, canetas, pincéis ou marcadores com praticidade e elegância.

---

## ✨ Features / Características

- **High Capacity (24 Slots):** Dual-wing layout with 12 holes on each side (2 rows of 6 holes per wing), providing quick access and beautiful color gradation display.

- **Multifunctional Valley:** The curved central space doubles as a catch-all tray for erasers, sharpeners, paperclips, flash drives, or sticky notes.

- **Stable Low Center of Gravity:** The smooth curved base keeps the organizer firmly seated on the table even when fully loaded.

- **Optimized for 3D Printing:** Chamfered hole entries and rounded fillets prevent pencil snagging and print cleanly without sagging.

- **3 Variants Included (V1, V2, V3):** The project contains 3 plates with design evolutions (standard with custom blocker, and refined geometric tolerances).

---

## 🖨 Recommended Print Settings / Configurações de Impressão

These settings were fine-tuned and tested on a **Bambu Lab A1 mini** using **PETG** filament:

| Parâmetro em Português | Slicer Variable (English) | Valor Recomendado |

| :--- | :--- | :--- |

| **Perfil da Impressora** | printer_model | Bambu Lab A1 mini (0.4 mm nozzle) |

| **Material / Filamento** | filament_type / filament_vendor | PETG (MasterPrint Arco-Íris Fosco) |

| **Altura de Camada** | layer_height | **0.16 mm** (Optimal balance of finish and speed) |

| **Altura da 1ª Camada** | initial_layer_print_height | **0.20 mm** |

| **Loops de Parede** | wall_loops | **3 paredes** |

| **Largura de Linha Externa** | outer_wall_line_width | **0.45 mm** |

| **Largura de Linha Interna** | inner_wall_line_width | **0.40 mm** |

| **Densidade de Preenchimento** | sparse_infill_density | **10%** |

| **Padrão de Preenchimento** | sparse_infill_pattern | **Gyroid (Giroide)** |

| **Camadas Superiores** | top_shell_layers | **4 camadas (0.80 mm)** |

| **Camadas Inferiores** | bottom_shell_layers | **3 camadas** |

| **Temperatura do Bico** | nozzle_temperature | **230 °C** |

| **Temperatura da Mesa** | textured_plate_temp | **75 °C** (Textured PEI Plate) |

| **Velocidade de Parede Externa** | outer_wall_speed | **55 mm/s** (for high surface quality) |

| **Velocidade de Deslocamento** | travel_speed | **350 mm/s** |

| **Suportes** | enable_support / support_type | **Árvore tree(auto))** / Desativados se bem calibrado |

| **Adesão à Mesa (Brim)** | brim_type / brim_width | Auto Brim (5 mm) se necessário |

---

## 💡 Print & Assembly Tips / Dicas de Impressão

1. **Orientation:** Imprima a peça apoiada na base curva conforme orientado no arquivo 3MF. O perfil em arco foi projetado para subir em balanço suave sem necessidade de suportes densos.

2. **Cooling:** Para PETG, mantenha a ventoinha entre 30% e 60% fan_min_speed / fan_max_speed) e aumente para 95% nos balanços overhang_fan_speed) para manter a curvatura limpa.

3. **Infill Choice:** O preenchimento Giroide gyroid) a 10% garante resistência multidirecional uniforme e evita vibrações no cabeçote.

4. **Bed Cleanliness:** Em chapas PEI texturizadas, limpe com água morna e detergente neutro ou álcool isopropílico para garantir adesão perfeita na primeira camada curva.

---

### ❤ Show your Makes!

Se você imprimiu este modelo, poste uma foto do seu Make e compartilhe as cores e filamentos que utilizou! Feedbacks e sugestões são sempre bem-vindos nos comentários.

Tagi