Big lilypad for Big Kermit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An upscaled version of the lilypad seat (for Big Kermit's body), for printing on an XL or other large printer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of bill de_cat's lilypad seat for Kermit the Frog, upscaled for printing with a Big Kermit. I wanted to print a version of Kermit as large as possible on my XL. This means inflating its size to about 250%. So I also needed a lilypad seat at 250% to match Big Kermit. However, when I scale up the original STL to 250%, I can clearly see individual polygons and triangles on some surfaces.
So I've greatly increased the polygon count, and really smoothed the flowing curves on top of the lilypad. The result is a great looking lilypad, ready for a Big Kermit.
Print this vertically with supports if you are able to. You will have a much better top surface finish than if you print it flat without supports. You can print it flat without supports, but you will see the 'stair-stepping' effect on the surface. Like a topographical map, it's best printed vertically.