Threaded Bath Overflow Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a plug to seal up a 2" overflow hole in a bath tub. It can also be loaded into tinkercad and modified if you…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 442
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a plug to seal up a 2" overflow hole in a bath tub.
It can also be loaded into tinkercad and modified if you wish to modify the end to attach an overflow pipe as a lot of fittings require a 1.5" hole.
I have also included just the 45mm thread section incase it is easier for others to start any modifications from that.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.16mm
Infill:
25%
Filament:
Sunlu & Enotepad PLA and TPU for the O-Ring
Notes:
A 2mm wall thickness is more important than the infill percentage as you want the thread to be strong.
Category: Bathroom