Mason Jar Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found the original difficult to print as the logo was protruding so it could not be printed with the top of the lid…
- Ocena
- 5 / 5
- Polubienia
- 279
- Pobrania
- 2330
- Wydruki
- 15
- Wyświetlenia
- 7049
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I found the original difficult to print as the logo was protruding so it could not be printed with the top of the lid face down. I wasn't particularly bothered about the design so I removed it.
There is also an alternative design which is recessed where the glass meets the lid where you can place an o-ring which I have also included. This helps to create a better seal.
Finally I have included a cutting guide for grease proof paper or whatever other material you wish to use to seal against the top of the glass as PLA/TPU is neither airtight or food safe.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.16mm
Infill:
20%
Notes:
Lid can be printed in any material.
The o-ring should be printed in TPU. It is designed to be an almost exact fit and you might find it a bit loose. If your TPU is quite stretchy you can scale it down in size a little for a better fit.
Category: Containers