ACDelco Battery Cover - Energizer R59
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed ACDelco battery cover. Fits Odyssey Drycell Battery 25-PC1400.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Open Community License v1.1 + General Attribution v1
3D-printed ACDelco battery cover
Made to fit the Odyssey Drycell Battery 25-PC1400.
The breathers can either be glued to the cover or screwed into place. The breathers have holes designed for M5 threaded inserts and the battery cover has countersunk holes for the M5 bolts (M5x17).
Dimensions: 182 mm center-to-center distance between the battery terminals, Ø22 mm. Internal dimensions: 147 × 219 mm.
Extra: You need to remove the protruding positive and negative symbols on the original battery cover to allow the new cover to sit all the way down and ensure the battery terminals are tall enough.
If you have any wishes or suggestions, please feel free to reach out!