1 / 1
UniFi Smart PoE Chime – ABB C70-16/19 Ceiling Junction Box Adapter — zdjęcie 1

UniFi Smart PoE Chime – ABB C70-16/19 Ceiling Junction Box Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

UniFi Smart PoE Chime – ABB C70-16/19 Ceiling Junction Box Adapter

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Description:
Flush-mount your UniFi Smart PoE Chime cleanly into the ceiling with this custom-designed adapter! This model allows you to press-fit the Chime seamlessly into a standard ABB C70-16/19 ceiling junction box (or similar European junction boxes).

To achieve a perfectly flush finish, the adapter utilizes the Chime's original bayonet mounting system. Additionally, the design features dedicated slots for eight 8x1mm magnets, allowing you to snap the original cover ring firmly into place for a clean, screwless look.

⚠ Important Notes & Installation:

  • Modification Required: You will need to remove/cut out the two original inner mounting points (screw pillars) inside the ABB junction box to make room for the adapter.

  • Work in Progress: This design is currently untested. I would highly appreciate your feedback, makes, and comments to help refine the tolerances if needed!

Recommended Print Settings (Suggested):

  • Material: PETG or ABS (for durability and heat resistance near ceiling wiring), though PLA can be used for testing.

  • Infill: 15-20%

  • Supports: REQUIRED / MANDATORY (Essential for the bayonet slots).