Vacuum Hose Adapter - Carbatec 4" Dust Port to 1¼" Vacuum Hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts the tapered 4" dust port on Carbatec machines to 1–¼" (32 mm) Shop-Vac hose. Offset and centered versions.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I designed this to attach a standard 1–¼" (32 mm) shop-vac hose to my Carbatec benchtop jointer. I was pleasantly surprised by how effective the dust extraction was using the "offset" model, which allows gravity to do some of the work since the hose is attached at the bottom of the fitting. The slight taper on the fitting gives a very secure fit into the tool's dust port.
There's also a "centered" variant which can be printed without supports. STEP files included to allow easy modifications to the design.