OneXPlayer 3 Belly Stand

BellyMate stand adapted for the  OneXPlayer 3

I wanted a belly stand for my OxP3 and none of the existing stands fit the OxP3 or I didn't like the design. I did quite a bit of prototyping and revisions to get a design doesn't interfere with the ports on the top, volume buttons, or the vents on the top and back. You can lay down and play without your hands getting tired. I added spring guides to improve feel and protect the springs from over compression.

Credit: This is a remix and adapter for BellyMate – Handheld Stand by Cholo (@shaq981). It’s shared with his permission. The base (foot, sleeve, knob) and the original stem are his design, so download and print those from his page. Part 09 is his stem with a widened claw. Please support the original designer.

What’s included: housing, spring-loaded hook, spring cover, clamp bar, thumbscrew, spring guide pins, wide-claw stem (PETG), and glue-on TPU 95A liners for the hook and claw.

You’ll also need: two compression springs, about 30 mm free length [5mmOD,0.5mmWD,30mmFL], and flexible CA glue for the liners.

Printing:

• PETG: 4 walls, 35% gyroid. Supports off, except under the front lip of the claw on part 09.

• TPU 95A: dry it first. One part per plate, 6 mm brim, minimal retraction, no Z-hop.

• Orientation: Lay the top/bottom claws on their long side to improve strength and simplify printing. The bottom claw is the only part that needs support around the lip that holds the handheld. 

Full settings and assembly steps are in the README.

License: free for personal use. Please don’t sell these files or prints of them for sale.