TPU HifiMan Sundara Headband
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement headband for HifiMan Sundara's made using TPU
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement strap made from TPU. Modeled by hand using my original (damaged) leather strap as a template.
This project includes the main body STL for the strap and a modifier component. You can use the modifier component to adjust the flexibility of the middle of your headband to fit your desires. I personally chose to set the top and bottom layer setting to 0 and expose the infill pattern to allow for airflow and style.
Installation can be done by following: IFIXIT HIFIMAN Sundara Headstrap Replacement Guide
NOTE: The guide shows cutting the 'metal fastener'. This step was not necessary for me, I was able to remove the fastener without damage by using a plastic pry tool. This component is held in place by some glue which may have weakened over time or could be softened by using a hairdryer or solvents.