1 / 2
Garage Door Window Trim for aftermarket insulation
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
added insulation and needed new trim rings
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
If requested I can upload the SCAD file if you need to make adjustments.
4 printable parts with dovetail joints on the backside of butt joints on the face. Plugs to fill the holes. Uses same hardware. Just print and replace after installing insulation. Has a .25 inch ring to clean up cut edges and hold insulation in place.
Again.... SCAD file if you want to adjust it to your needs
