1 / 2
10-Gallon Aquarium Lid with Vented LED Hood & Removable Feeding Door — zdjęcie 1
1 / 2

10-Gallon Aquarium Lid with Vented LED Hood & Removable Feeding Door

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modular aquarium lid featuring a centered LED light cradle, vented hood, removable front section, and flush feeding door

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
22
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Upgrade your aquarium with a custom 3D-printed lid designed for functionality, easy maintenance, and a clean appearance.

This modular lid features an integrated LED light cradle, removable vented hood, interlocking panels, and a convenient lift-out feeding door. Designed for PETG printing, all components fit within a 10" × 10" print bed.

Features

  • Modular Construction: Interlocking panels create a complete lid without requiring a large-format printer.

  • Integrated LED Mount: Centered, flush-mounted cradle accommodates a 10.5" × 4" LED light with an 8" × 3" illuminated opening.

  • Vented Light Hood: Removable, straight-sided cover with ventilation slots and downward locking pegs to prevent shifting.

  • Removable Front Section: The front 3.25" of the lid lifts off for aquarium maintenance.

  • Flush Feeding Door: Removable feeding hatch with an integrated handle for quick feeding access.

  • Filter Compatibility: Rear cutout accommodates a hang-on-back filter.

  • Cable Management: Dedicated openings for the heater and LED power cords.

  • No Metal Hardware: Designed around printed interlocking components.

Dimensions

  • Aquarium exterior: 21" × 10.25"

  • Lid seating area: 19.5" × 9.75"

  • LED housing: 10.5" × 4" × 15 mm

  • LED opening: 8" × 3"

  • Filter clearance: 6.75" × 2"

  • Removable front section: 3.25" deep

Printing Recommendations

  • Material: PETG

  • Print bed: Minimum 10" × 10"

  • Supports: May be required for certain components depending on orientation

  • Assembly: Interlocking panels with removable hood and feeding hatch

Important Notes

This lid was designed around specific aquarium and lighting measurements. Verify your aquarium rim, filter, and lighting dimensions before printing.

The model is a prototype design, and individual parts may require slight fit adjustments depending on your printer's tolerances.

Enjoy your new aquarium lid, and feel free to share pictures of your finished print or any modifications you make!

Tagi