1 / 4
Babylon (HPA Foam dart Blaster) — zdjęcie 1
1 / 4

Babylon (HPA Foam dart Blaster)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This Blaster is Low hardware, Simple assembly, uses Jerico Shells and matches its power.

Ocena
0 / 5
Polubienia
2
Pobrania
10
Wydruki
0
Wyświetlenia
59
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial

This Project should be printed with at least 4 walls and 10% gyroid infill. I used 1 roll and a half for the main color. The only two tricky parts of assembly are:

1. Hot glue the spring to the trigger to make it easier to get the grip and spring into place so they can be pinned to the blaster. 
2. After the trigger raiser is pinned onto the electric toilet plungers trigger area and the blaster has been constructed you will need to wiggle the Babylons trigger to get it to line up correctly and friction fit with the trigger raiser. 

Additional Hardware: 
(1) Amp force electric toilet plunger
(1) 20 x 2.4mm O ring (Not mandatory to work, just to optimize performance)
(12) 10x2.3mm magnets (I used fridge magnets off amazon.) 
(1) 25 x 5.6mm Spring (I got mine out of a kit. I suspect other springs will work fine.) (Not mandatory but trigger will be a small bit floppy without it) 

Arranged in intended print orientation. The medium and long length pins can be colored to match the blaster shell colors if you like. Please Print blaster tip Orange. Please read the Plunger manufacturers saftey guidelines. The Plunger will automatically turn off after around 15 seconds after holding the activation button, that is plenty of power for 95% of ingame applications. While you can reactivate the air filling mode never fill beyond the displayed limit, press the button once to deactivate the charge. The bottom has an indicator light I've left exposed, if its blinking red stop using it and recharge. Please note the Plunger was not designed for this purpose. Please give it adequate time to cool off during play espessiallly if its begining to radiate heat (I experienced this after rapid use toward the end of a 2 hour game day with minimal breaks)