Larry Bird #33 Boston Celtics Dimensional Jersey
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Larry Bird #33 Boston Celtics dimensional jersey display, with the Celtics logo under the numbers.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Larry Bird #33 Boston Celtics dimensional jersey display, with the Celtics logo under the numbers. Designed and printed by Three-D Craftsmen.
Multicolor print profile for Bambu Lab printers with an AMS, sliced in Bambu Studio. The 3MF carries the colors and settings from my original print.
PRINT SETUP
0.4mm nozzle, 0.2mm layer height, PLA. Model size is about 151 x 247 mm.
COLORS
Five colors in the AMS, with one swap at the pause.
1. Green: jersey body and the logo ring
2. White: BIRD, 33, trim, and the logo circle
3. Black: logo outlines, pants, and hat
4. Cream: face, hands, and vest
5. Brown: basketball and cane, swapped in at the pause (see below)
THE PAUSE
There is a pause built into the file at layer 27 (5.4 mm). White is completely finished at that point: swap the white AMS slot to brown and resume. In the file, the brown areas are painted as filament 2 (shown as a khaki tan); assign filament 2 to the same AMS slot as the white. Green is done even earlier, at 4.0 mm. After the pause, black finishes, then cream prints, and the brown prints last, at the top of the logo.
For personal use only, please. If you print one, I would love to see a photo of it.