Low Polygon Skull Vase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I thought a skull would be a good model to experiment with, for my first time making low polygon art with Meshmixer…
- Ocena
- 4,6 / 5
- Polubienia
- 53
- Pobrania
- 327
- Wydruki
- 11
- Wyświetlenia
- 1514
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I thought a skull would be a good model to experiment with, for my first time making low polygon art with Meshmixer and Meshlab. Also, I wanted a functional and eye catching vase/drinking cup.
The print you see in the picture has been scaled up to 200%.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
Yes
Supports:
No
Resolution:
0.2mm
Infill:
10%
Filament:
Hatchbox PLA
Notes:
The print in the photo was sliced with spiralize outer contour activated in Cura (aka: "vase mode"). Therefore, it has 0% infill.
However, an infill of 10% or more is adequate if you want to print it with thicker walls.Category: Decor