Raspberry Pi 3 B snap case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two-part, snap-fit case for the Raspberry Pi 3 Model B V1.2, with a vented lid and port cutouts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A snap-fit case for the Raspberry Pi 3 Model B V1.2. The base and lid press together, so you don't need screws, and the lid has a set of ventilation slots over the board.
The case has cutouts for the board's ports on the side and end faces. Check the fit against your own board before you print a batch, because port positions differ between Raspberry Pi models. This design is for the 3 B V1.2 only.
It's designed in Autodesk Fusion, so you can open the file, change a wall thickness or add a cutout, and print your own variation. The Fusion file (.f3d) is included.
What you need
A Raspberry Pi 3 Model B V1.2
A 3D printer and PLA filament
Print settings (suggested starting point)
Material: PLA
Layer height: 0.2 mm
Walls: 3
Infill: 15%
Supports: none
Orientation: flat face on the bed