1 / 1
Vince Carter #15 Raptors Jersey – Exposed Infill — zdjęcie 1

Vince Carter #15 Raptors Jersey – Exposed Infill

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vince Carter #15 Raptors jersey with purple dinosaur-era design and exposed infill texture.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Bring some classic Toronto basketball nostalgia to your 3D printing collection!

This Vince Carter-inspired #15 Raptors jersey features the iconic purple dinosaur-era design, recreated as a dimensional 3D-printed art piece.

Design highlights:

Exposed infill creates a textured jersey appearance.

Multicolor details bring the dinosaur, lettering, and numbers to life.

Raised design elements add depth and dimension.

Great for sports displays, basketball fans, and jersey collections.

Printing tips:

Start with a thoroughly cleaned build plate. Good first-layer adhesion is especially important for exposed-infill designs.

Review the filament assignments and color changes before printing.

Keep the model flat on the build plate.

Avoid enabling top or bottom solid layers over the intended exposed-infill areas.

Check the sliced preview before starting your print.

Recommended Filament Swap at Pause:

To reduce the number of filament slots needed, I recommend swapping the purple filament for red at the programmed pause.

Start the print with purple filament loaded in its assigned slot.

When the printer reaches the programmed pause, remove the purple filament from that slot.

Load red filament into the same slot previously occupied by purple.

Resume the print. The printer will now use red whenever the print profile calls for that original purple filament slot.

This allows you to use purple for the earlier portions of the jersey and red for the later details without requiring an additional filament slot.

Important: Make sure the filament swap is completed before resuming the print, and verify that the programmed pause is preserved in the sliced file.

Designed and printed by Three-D Craftsmen.

Fan-created artwork. Not affiliated with or endorsed by the NBA, Toronto Raptors, or Vince Carter.