K1 Max Riser on Steroids with printable spool holder and side panel template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've remixed the original model to add a spool holding rod in between left and right sides.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a minor remix to the original work by @voiyt on Solidcraft.
Simply grab the original corners (preferably the ones without the holes) and print.
Then print the connector parts from my remix. You'll need 2 x connector with holes and 6 x connector without holes.
Print 2 of the spool holders.
I designed for 19mm aluminum broom rod but you can adjust the Solidcraft model and make it fit to the material you have.
The measured length of the rod is 37cm.
I also used my already existing riser on top of this riser for easier fit and ventilation.
You'll also need at least 4 3mm screws to mount the spool holders to the side connectors.
The last thing you'll need is the cover panels for the side openings. For your convenience I added a PDF file which you can use for laser cut plywood and acrylic panels.
