Prusa Core One INDX Cover Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple flat handle for the INDX cover. No visible screws and holes. Easy to mount using the existing screws.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This simple handle is printed in three pieces: two studs that go under the vent screws and the handle itself. The components are then simply press-fitted together, with the layer lines holding them in place. The handle covers the screws for a clean look. The satin texture of the print plate gives the handle a nice matte finish.
Assembly:
Remove the vent screw from the front of the cover. Hold the vent grille and its mount in place.
Insert the screw into one of the studs and screw it back into the cover. (See the second photo.)
Repeat with the other stud.
Insert the handle into the studs. A little pressure is required. Support the cover from the inside while doing so.
Printed in Prusament PC Blend Black, but any decent filament should work just as well.