1 / 1
8" Press brake for harbor freight and other presses.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Have used for bending 5mm 6061 with a large radius to reduce stress. Bottom plate is interchangeable for access needs.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Had best luck with PLA+, and at least 7 walls with a .6 nozzle. I made the support rods printable, but I used bar stock off of amazon incase the PLA failed catastrophically.
I was able to press 4.75mm (.187") T6 Aluminum and the radius is gentle. No appreciable wear after heavy use.
