Kamen Rider My-th: Extended Buckle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printed Extension for the My-th Driver.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 1
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since creating my original extension for the Zeztz Driver my skills in 3D modeling improved alot, so I knew that when My-th was announced I wanted to make a better version of my extension for the new series, thus here we are.
The Buckle uses a button release, reverse engineered from the original Buckle and latch of the Zeztz Driver and retooled for the My-th Driver, I spent a very long time making it just about identical to the original and I'm very happy with it.
The only needed hardware needed is a spring from basically any ballpoint pen (0.4mm x 4mm x 30mm) cut to 10 - 15mm in length between the Back Plate and Latch Plate.
