1 / 6
Kamen Rider My-th: Rising Toggle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Toggle that when inserted into the Born Buckle slot activates Rising Mode.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Quickly after people received their My-th Drivers they noticed that pressing only one of the buttons in the Born Buckle slots changed the Driver's mode to an (as of now) unseen upgrade form. This Toggle activates My-th's Rising forms, allowing My-th to use the animal form seen on the Front of the Ride-Eggs, rather than just the back.
The only needed hardware needed is a spring from basically any ballpoint pen (0.4mm x 4mm x 30mm) cut to 10mm lengths for each side of the clips.
