Free Giant Christmas Tree Bead, Chunky Beads, Holiday Garland, 1 Bead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A free giant Christmas tree bead for garlands and holiday decor. One-color shape bead, horizontal and vertical hole.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Standard Digital File License
Giant Christmas Tree Bead
A free giant Christmas tree bead for Christmas garlands and holiday decor. A solid shape bead - print it in one color. Comes with a horizontal hole for beads that read across a string and a vertical hole for names that hang straight down.
Make with it
Christmas tree garlands and mantel swags
Name garlands with letter beads for stockings, doors and mantels
Hang one on a ribbon as a giant Christmas tree ornament
Holiday party backdrops and photo props
Market and craft fair inventory
Features
Solid shape - prints in one color with no filament changes
Diamond-shaped hole has no overhangs, so no supports are needed
Mixes with the giant letter beads - letters for the name, shapes to break it up
Color ideas
Pastel mint for a soft pastel Christmas garland
Deep green on a red cord for a classic Christmas look
Dimensions
Part | Size |
|---|---|
Bead | 81.1mm x 100mm x 34mm (3.19in x 3.94in x 1.34in) |
Stringing hole | 18mm (0.71in) |
Print time | approximately 2 hours per bead |
What's included (2 STL files)
Horizontal hole version
Vertical hole version
Scaling
25mm (25%) is the smallest safe size - the walls are 1mm thick at that scale
Scaling below 25mm drops the walls under 1mm and they get too thin to print well
Commercial use
Print and sell the physical beads, garlands and jewelry you make! Commercial use is included - great for makers selling at markets, craft fairs and online shops.
Printer settings
Layer Height: 0.2mm
Walls: 2-4 (3 is a good default)
Top/Bottom Layers: 5
Seam: Scarf joint if your slicer has it, otherwise Aligned
Infill: 15% Gyroid or Grid pattern (10% for a long garland you want light)
No supports
Print flat side down
Temperature settings depend on your filament and printer
Safety & disclaimer
Decorative use only - not a toy, not food safe, and not suitable for young children as small parts may break off and become a choking hazard. The Taco Dimension is not responsible for any negative impact caused as a result of improper use and/or handling of any 3D printed items.
If you enjoy this free file, please consider leaving a review — it really helps! Check out my shop for more 3D printable designs.
Print it and tag me in your makes!