Arm & Hammer 14 oz Refillable Moisture Absorber Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn your Arm & Hammer 14 oz disposable moisture absorber into a reusable, refillable container with this printed lid.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Why throw away a perfectly good container when you can refill it?
I designed this replacement lid for the Arm & Hammer 14 oz (396 g) Moisture Absorber & Odor Eliminator so the original disposable container can be reused instead of thrown away.
The lid features a ventilated design that allows moisture from the air to reach the moisture-absorbing crystals inside.
This is the larger version of my replacement lid design, made specifically for the 14 oz Arm & Hammer container.
Preparation
Remove the original plastic lid.
Carefully cut away the factory fabric membrane covering the container opening.
Empty and clean the container when the original moisture absorber is exhausted.
Add fresh moisture-absorbing crystals according to the refill manufacturer's instructions.
Install the printed replacement lid.
The container can now be refilled and reused as needed.
Features
Designed for the Arm & Hammer 14 oz (396 g) moisture absorber container
Converts a disposable container into a refillable one
Ventilated design for airflow
Reusable and removable lid
Reduces plastic waste
Simple print with no supports required
Printing
Material: PLA or PETG
Supports: None
Orientation: Flat perforated surface against the build plate
Notes
This design is intended for use with compatible moisture-absorbing refill crystals, such as calcium chloride.
The lid is ventilated and is not spill-proof or child-resistant. Keep the container upright and away from children and pets.
Follow the refill manufacturer's instructions for filling, handling, and disposal. Do not overfill the container or obstruct its liquid collection area.
Compatibility: This lid is designed for the Arm & Hammer 14 oz (396 g) container. It is not interchangeable with my smaller DampRid 10.5 oz (297 g) lid.
This is an independently designed replacement lid and is not affiliated with Arm & Hammer.