6.5" Front Door Speaker Adapter for Honda Civic 7th Gen (2001–2005)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6.5" front door speaker adapter for 2001–2005 Honda Civic with dual mounting options and two ring heights.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this speaker adapter to install aftermarket 6.5-inch speakers in the front doors of a seventh-generation Honda Civic (2001–2005).
The adapter offers two mounting methods, wiring clearance for component speakers, and two ring heights to accommodate different speaker designs.
Features
Two Mounting Options
Factory Clip Mount: Includes a mounting wing designed to use the original factory clip-in mounting location.
Screw Mount: Three mounting holes allow the adapter to be secured directly to the door using self-tapping screws.
Speaker Wire Clearance
Semicircular cutouts provide clearance for speaker wiring.
Particularly useful for component speakers with separate wiring connections.
Two Ring Heights
Standard Ring: Designed for conventional 6.5-inch speakers.
Shorter Ring: Reduced in height by 1 mm to accommodate the mounting flanges of certain coaxial speakers with center-mounted tweeters.
Compatibility
Vehicle: Honda Civic, seventh generation (2001–2005)
Location: Front doors
Speaker Size: 6.5 inches (165 mm)
Speaker Types: Component and coaxial speakers
Speaker dimensions vary between manufacturers. Verify the mounting flange dimensions and available clearance before installation.
Printing
Material: PETG or ABS recommended for automotive interior temperatures.
Orientation: Print with the flat mounting base against the build plate.
Supports: Check the mounting wing and wire-clearance cutouts in your slicer to determine whether supports are necessary.
Installation
Remove the factory door panel and original speaker.
Select the appropriate adapter height for your aftermarket speaker.
Position the adapter using either the factory clip mounting location or the three screw mounting holes.
Secure the adapter to the door.
Route the speaker wires through the semicircular clearance openings.
Mount the speaker to the adapter.
Check window operation, speaker clearance, and door panel fitment before reassembly.
Notes
The shorter ring provides an alternative mounting height for speakers with different flange requirements, including certain coaxial designs with integrated tweeters.
Check that the speaker magnet and basket do not interfere with the window glass or regulator, and that the tweeter clears the factory door panel.
A thin foam gasket between the adapter and door may help reduce vibrations and improve the seal.
This is an independently designed aftermarket speaker adapter and is not affiliated with Honda.