1 / 3
Li Kui, the Black Whirlwind: Boar Warrior Figure (120 mm) — zdjęcie 1
1 / 3

Li Kui, the Black Whirlwind: Boar Warrior Figure (120 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Li Kui from Water Margin as a boar warrior with twin axes. 120 mm with a base, made with multi-view AI image to 3D.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Li Kui, the Black Whirlwind of Water Margin, reimagined as a tusked boar warrior with a red headband, rope sandals and a battle axe in each hand.

The STL is one closed, watertight solid, 120 mm tall including a fitted base, so it stands on its own. It is about 89 x 40 mm across with the axes, and needs roughly 32 g of PLA by our estimate.

How it was made: the character was drawn from four views (front, left, back, right), turned into a textured 3D model with 3DLoom's multi-view image to 3D (https://3dloom.com/image-to-3d), and exported as a print-ready STL with a base.

Print notes: about 0.2% of the model is thinner than 1 mm. The axe handles and blades are the thinnest parts, so check them in your slicer and support them. Resin or a 0.2 mm nozzle will keep more of the detail.

I haven't printed this one myself yet, so photos and settings from your print are very welcome as a Make.

Part of a set of Water Margin heroes reimagined as animal warriors: Li Kui, Lin Chong, Lu Zhishen and Wu Song.

Tagi