Lin Chong, the Panther Head: Snow Leopard General Figure (120 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lin Chong from Water Margin as an armored snow leopard with a spear. 120 mm with a base, made with multi-view AI to 3D.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
Lin Chong, the Panther Head of Water Margin, reimagined as a snow leopard general in scale armor and a wide-brimmed hat, holding a long spear with a red tassel.
The STL is one closed, watertight solid, 120 mm tall including a fitted base, so it stands on its own. It is about 65 x 36 mm across, and needs roughly 23 g of PLA by our estimate.
How it was made: the character was drawn from four views (front, left, back, right), turned into a textured 3D model with 3DLoom's multi-view image to 3D (https://3dloom.com/image-to-3d), and exported as a print-ready STL with a base.
Print notes: about 0.3% of the model is thinner than 1 mm. The spear shaft and tip are the thinnest parts, so check them in your slicer and support them. Resin or a 0.2 mm nozzle will keep more of the detail.
I haven't printed this one myself yet, so photos and settings from your print are very welcome as a Make.
Part of a set of Water Margin heroes reimagined as animal warriors: Li Kui, Lin Chong, Lu Zhishen and Wu Song.
