1 / 3
Shi Qian, Flea on a Drum: Fennec Fox Thief Figure (120 mm) — zdjęcie 1
1 / 3

Shi Qian, Flea on a Drum: Fennec Fox Thief Figure (120 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shi Qian from Water Margin as a hooded fennec fox thief with a blade. 120 mm with a base, made with AI image to 3D.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
4
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Shi Qian, Flea on a Drum of Water Margin and the band's master thief, reimagined as a hooded fennec fox with a curved blade and a belt of pouches.

The STL is one closed, watertight solid, 120 mm tall including a fitted base, so it stands on its own. It is about 83 x 76 mm across, and needs roughly 24 g of PLA by our estimate.

How it was made: the character was turned from a single image into a textured 3D model with 3DLoom's image to 3D (https://3dloom.com/image-to-3d) and exported as a print-ready STL with a base. The back was inferred by the AI, so it is simpler than the front.

Print notes: about 0.4% of the model is thinner than 1 mm. The blade, ear tips and tail tip are the thinnest parts, so check them in your slicer and support them. Resin or a 0.2 mm nozzle will keep more of the detail.

I haven't printed this one myself yet, so photos and settings from your print are very welcome as a Make.

Part of a set of Water Margin heroes reimagined as animal warriors. The rest of the set is on my profile.

Tagi