1 / 1
Table Shadow Lantern – Winged Hussar Wings — zdjęcie 1

Table Shadow Lantern – Winged Hussar Wings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A tealight lantern that spreads the wings of the Polish Winged Hussars in light across the table.

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Two tall hussar wings of light rise up to 45 cm across the table, every feather a ray: the wall openings are the exact central projection of the wings from the flame, verified with a ray-tracing simulation. Print it in red, black or another opaque filament for the sharpest light. Generated algorithmically (signed distance fields + marching cubes), checked watertight and printable.

Made for a standard IKEA tealight (Ø38 mm), which sits in a Ø39.6 mm socket; the top is open for heat. For a real flame print in PETG or ASA and never leave it unattended – an LED tealight is the safest choice, as PLA softens near heat.

PRINT SETTINGS

Size: 125 × 125 × 77 mm, approx. 216 g of PLA

Nozzle 0.4 mm, layer 0.16–0.2 mm, 2–3 walls

Print upright on the flat base; add tree supports only where your slicer reports overhangs

Always follow your filament manufacturer's recommended temperatures first

Part of the Revo3D generative collection. Made by Revo3D, builders of large-format Revon 3D printers – revo3d.pl/en

PO POLSKU

Lampion pod tealight, który rozpościera na stole skrzydła husarii ze światła – każde pióro to promień. Otwory w ściance są dokładnym rzutem środkowym z punktu płomienia, wyliczonym matematycznie. Drukuj z nieprzezroczystego filamentu (czerwony, czarny), w ciemnym pokoju na jasnym stole.

Tagi