1 / 1
Compact Shadow Lantern – Hussar Wings — zdjęcie 1

Compact Shadow Lantern – Hussar Wings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A compact 95 mm tealight lantern that projects sharp hussar wings of light close around it.

Ocena
0 / 5
Polubienia
2
Pobrania
0
Wydruki
0
Wyświetlenia
4
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The compact version: a 95 mm lantern with the tealight sitting low, so the hussar wings land closer – about 10–30 cm around – and sharper. Faster and cheaper to print. Use opaque filament. Generated algorithmically (signed distance fields + marching cubes), checked watertight and printable.

Made for a standard IKEA tealight (Ø38 mm), which sits in a Ø39.6 mm socket; the top is open for heat. For a real flame print in PETG or ASA and never leave it unattended – an LED tealight is the safest choice, as PLA softens near heat.

PRINT SETTINGS

Size: 95 × 95 × 57 mm, approx. 102 g of PLA

Nozzle 0.4 mm, layer 0.16–0.2 mm, 2–3 walls

Print upright on the flat base; add tree supports only where your slicer reports overhangs

Always follow your filament manufacturer's recommended temperatures first

Part of the Revo3D generative collection. Made by Revo3D, builders of large-format Revon 3D printers – revo3d.pl/en

PO POLSKU

Wersja kompaktowa: lampion 95 mm, skrzydła husarii lądują bliżej (ok. 10–30 cm) i są ostrzejsze. Szybszy i tańszy wydruk, nieprzezroczysty filament.

Tagi