Compact Shadow Lantern – Map of Poland
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact 95 mm tealight lantern that lights up a sharper map of Poland close around it.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
The compact version: a 95 mm lantern with the tealight sitting low, so the map of Poland with the Vistula lands closer – about 10–25 cm around – and sharper. Use opaque filament. Generated algorithmically (signed distance fields + marching cubes), checked watertight and printable.
Made for a standard IKEA tealight (Ø38 mm), which sits in a Ø39.6 mm socket; the top is open for heat. For a real flame print in PETG or ASA and never leave it unattended – an LED tealight is the safest choice, as PLA softens near heat.
PRINT SETTINGS
Size: 95 × 95 × 57 mm, approx. 98 g of PLA
Nozzle 0.4 mm, layer 0.16–0.2 mm, 2–3 walls
Print upright on the flat base; add tree supports only where your slicer reports overhangs
Always follow your filament manufacturer's recommended temperatures first
Part of the Revo3D generative collection. Made by Revo3D, builders of large-format Revon 3D printers – revo3d.pl/en
PO POLSKU
Wersja kompaktowa: lampion 95 mm, mapa Polski z Wisłą ląduje bliżej (ok. 10–25 cm) i jest ostrzejsza. Nieprzezroczysty filament.