1 / 12
Patriarch the black dragon king sat on his throne — zdjęcie 1
1 / 12

Patriarch the black dragon king sat on his throne

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D model of the dragon lord Patriarch the Black as seen in the games Divine Divinity by Larian Studios. My own design.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
2
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

3D model description

3D model of the dragon lord Patriarch the Black as seen in the games Divine Divinity and Divinity2: Dragon Knight Saga by Larian Studios.

He is sat on his throne in his lair leaning forward as if about to get up and stand glaring down at the unseen kneeling figure before him.

Makes a great piece for fans of the Divinity universe and dragons in general. A resin printer will give the most detail however for FDM printers, print large to maintain detail or use a low layer height of 0.08mm at the expense of printing time.

The dragon has no tail for ease of clarity and use. Was made with AI using image to 3D generation but required editing in Blender to get it right.

3D printing settings

Print upright as-is. Recommend tree supports and set top layer interface distance to 0.24-0.28mm and carefully remove them to avoid damaging the wings.

Do not use matte filaments as they are too fragile. Recommend PLA+ or print it on a resin printer.

NOTE: 3D preview shows the infill density modifiers, these are not on the final model.

Tagi