Rain shower descaling tray (20cm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
practical tray designed specifically for descaling a 20cm, square rain shower heads
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Description: A simple, practical tray designed specifically for descaling a 20cm size rain shower heads. It allows you to fully submerge the shower head in vinegar or descaling fluid without wasting a large amount of liquid in a random bucket or bowl. No tools or disassembly required.
Printing recommendations:
Material: PETG (recommended for better water and chemical resistance) or PLA.
Perimeters/Walls: 3 or 4 (crucial to ensure it's completely watertight).
Infill: 15-20%.
Supports: No supports needed.
For assembly, You need 4x M5 screws
Please note: The physical print shown in the photos is an earlier prototype. The final 3D files include an additional side spout/funnel (visible in the 3D render) that makes pouring and checking the fluid level much easier.