1 / 3
Christmas Shadow Lantern for LED Tealights, Tree Scene — zdjęcie 1
1 / 3

Christmas Shadow Lantern for LED Tealights, Tree Scene

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Chalet style Christmas lantern for LED tealights that casts a tree shadow on the wall. No supports or glue.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Covers are renders. Software checks (watertight, one body per file, 180 mm bed, no supports by overhang check, light through the tree picture) are in the pack.

LED TEALIGHTS ONLY, NEVER A REAL CANDLE. The lantern is plastic and a flame would melt it.

Full version (with the turning scene ring and 4 scenes) on Cults: https://cults3d.com/en/3d-model/home/christmas-shadow-lantern-chalet-lantern-with-turning-scene-ring-for-led-tealigh

Printables edition: a complete little chalet lantern with one fixed picture, a Christmas tree with snowflakes and presents. Put an LED tealight in the bay, switch the room light off and the tree appears on the wall. It is four parts: base, ring, lid and a chalet roof with a chimney. It is a finished print on its own. I have not test printed it yet.

How it works

The ring is a thin dark wall round the tealight and the tree is a hole in it, so light only gets out through the picture. The ring sits on the base inside a low lip. Four square posts rise from the base and fit into pockets under the lid, so the lid holds everything by stacking, and the roof sits on the lid with its foot ring in a groove. No glue. The ring is a loose fit, so you can turn it by hand to aim the tree at your wall. The other three sides of the ring are plain apart from a band of snowflakes. Every part prints with no supports.

What you get

  • Base, ring, lid and roof STLs and a coloured 3MF as a colour guide

  • A tealight bay 40 mm wide, for LED tealights 36 to 39 mm wide and up to about 44 mm tall

  • Built size about 85 x 85 mm and 99 mm tall with the roof

What you need

  • About 94 g of filament and around 6.0 hours of printing (estimate, not slicer output): base about 32 g and 2.0 h, ring about 17 g and 1.2 h, lid about 18 g and 1.1 h, roof about 27 g and 1.7 h

  • PLA or PETG, 0.2 mm layers, 4 walls on the ring, 15% infill, no supports. Print as supplied (the lid is already upside down for printing, and the roof prints with its eaves on the bed).

  • A dark opaque filament for the ring (black, navy or dark green), or the light glows through the wall. A battery LED tealight.

  • Shadows from an LED tealight are soft, and the cover shadows are rendered with a small light so they look sharper than a real tealight will give. Use a dark room and put the lantern 30 to 100 cm from a pale wall.

Licence: Standard Digital File License

There are more models and a few small games at dexmlabs.app.

Happy to tweak the design on request.

Tagi