Kodai Cutlery Drainer, Three Compartments, Screw-Together
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cutlery drainer with three compartments and fine vertical ribs over a smooth Foot that catches the drips. No glue.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A cutlery drainer that screws together, no glue.
Wet cutlery goes into the Dripper, split into three compartments. Water runs through the holes in its floor into the Foot, and air comes in through the hexagonal windows around the sides. The Base, with the Kodai pattern of fine vertical ribs, runs from the Foot to the rim.
Unscrew the Foot to empty it. Unscrew the Dripper to clean it.

Size

Parts
Base: outer body with the Kodai pattern of fine vertical ribs
Support: printed with the Base, around its lower edge. Remove it after printing.
Foot: smooth part that screws onto the bottom of the Base and collects the drips. Print it in a second colour.
Dripper: holds the cutlery in three compartments, hexagonal windows around the sides, dripping holes in the floor

Assembly
Remove the Support from the Base.
Screw the Foot onto the bottom of the Base.
Screw the Dripper into the top of the Base.

Print settings
Two plates: the Base with its Support; the Foot and the Dripper, printed one after the other (sequential printing). Print the two plates in different colours if you like.
2 walls, 6% lightning infill
Top and bottom surface pattern: concentric
No slicer supports
The settings saved in the project file are tuned for this model. We suggest you use them.
