1 / 8
Wire "Crunch Wrapper:" Terminals, Nuts and Socket Wrench  (M8) — zdjęcie 1
1 / 8

Wire "Crunch Wrapper:" Terminals, Nuts and Socket Wrench (M8)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Got tired of wire-wrappings test rigs as well as those plethora of expensive, metal (unsafe?) wire jacks so I thought…

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Got tired of wire-wrappings test rigs as well as those plethora of expensive, metal (unsafe?) wire jacks so I thought I'd design a way to bind our galaxies together. 😏

Can scale, but the default "crunch slot" is 1.2 high as well as wide. - Perfect for classic combines of those common wire-gauges.

Contact me if you'll need others.

p.s. The best way to tell if the design is final is when you see us using TWO nuts to crunch-wrap the forces together. 😝

💫 NEW: Updated with finger-friendly "paddle bolts." 🤓

💫 NEW: Four (4) Crunch-Posts -w- Cap-Puts (M8.BoltTerminalx4_SET)

💫 NEW: The M5 edition is smaller out-of-the-box.

👉 Version: 1.5

p.s. Consider setting your WALL THICKNESS to at least 5, and your infill to 70 - 80%?

Category: Electronics

Tagi