1 / 6
CNC router Gecko G540 35mm din rail mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this to mount the Geckodrive G540 Stepper Motor Driver in my control box. I decided to change the design and…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this to mount the Geckodrive G540 Stepper Motor Driver in my control box. I decided to change the design and put a 0.500" clearance between the bottom of the controller to help with cooling since i am going to pt a fan blowing on it.
Screws for mounting the driver are M3 screws and nylock nuts
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2X
Rafts:
No
Supports:
No
Resolution:
.300mm
Infill:
100%
Category: Other