1 / 5
Personalized Christmas Ornament – Name & Year 2026, One Filament Change — zdjęcie 1
1 / 5

Personalized Christmas Ornament – Name & Year 2026, One Filament Change

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two-colour name & year Christmas bauble for single-nozzle printers. One filament change, no supports, about 25 min.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
2
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Put their name on the tree this year: a two-colour name & year bauble from a single-nozzle printer.

One filament change, two colours, no supports, about 25 minutes.

What you get

  • Round bauble with a raised script name, bold year, two stars and a raised rim

  • Ready STLs: "Sam 2026" example and a year-only 2026 version

  • Make any name: the included OpenSCAD file (free) or the Python source (python build.py --name "Sam" --year 2026)

  • Bambu Lab P1S / OrcaSlicer 3MF projects for PLA and PETG, plus STEP

Fits / size

  • 72 × 87 × 4 mm

  • Base 3.0 mm + everything raised (name, year, stars, rim) in the top 1.0 mm

  • 4.8 mm hole in a solid loop for ribbon, twine or a standard ornament hook

Print settings

  • PLA or PETG · 0.20 mm layers · 3 walls · 15 % gyroid infill · no supports · no brim · Textured PEI

  • Two colours: add one filament change before layer 16 (Z 3.2 mm)

  • PLA about 25 min / 11.5 g · PETG about 26 min / 11.1 g (OrcaSlicer total estimate, P1S)

FAQ

  • Do I need a multi-material system? No. One filament change before layer 16 gives you two colours on a single-nozzle printer.

  • Can I change the name? Yes: type it into the OpenSCAD file, or run the Python source. A year-only version is included.

  • Supports? None, and no brim.

  • Has it been printed? The files are digitally sliced and checked; see the note below.

These files are digitally sliced and checked, not yet physically fit-tested, in OrcaSlicer for a Bambu Lab P1S (0.4 mm nozzle, Textured PEI): 0 slicer warnings, no supports, all meshes watertight. Images are 3D renders; painted colours are digital mock-ups. Your printer, filament and settings may give different results. Not affiliated with or endorsed by Bambu Lab or OrcaSlicer. Download free and print one tonight. The other four are in the Handyfab Christmas Pack 2026 collection. If you print one, please post a Make!

Tagi