Flat to 3D Christmas Tree Ornament – Slot-Together, Hangs or Stands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two flat parts, about half an hour, one 3D Christmas tree. Slide together, then hang it or stand it on a shelf.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Standard Digital File License
Two flat parts, about half an hour, one 3D Christmas tree.
Slide them together and hang it from the star loop, or stand it on a shelf.
What you get
Two tree parts: one with the star and loop, one that slides down over it
A tiny fit coupon (slots at +0.2 / +0.3 / +0.4 mm) to check your fit first
3MF plates (PLA + PETG), STL, STEP and source (clearance is one number, clr)
Fits / size
About 70 × 70 × 112 mm assembled, with the hanging loop
Slot width 2.9 mm for 2.6 mm parts (0.3 mm clearance)
Flat trunks, so it's designed to sit on a shelf too
Print settings
PLA or PETG · 0.20 mm · 3 walls · 15 % gyroid · no supports
Tree plate: PLA about 33 min / 14.5 g · PETG about 34 min / 14.0 g
Fit coupon: about 13 min / 2.7 g
FAQ
Too tight or loose? Print the fit coupon first; if your tab is tight or loose, change clr in the source.
Glue? Not needed if the fit is right.
Strong? Not tested for strength: treat it as decoration.
These files are digitally sliced and checked, not yet physically fit-tested, in OrcaSlicer for a Bambu Lab P1S (0.4 mm nozzle, Textured PEI): 0 slicer warnings, no supports, all meshes watertight. Images are 3D renders; painted colours are digital mock-ups. Your printer, filament and settings may give different results. Not affiliated with or endorsed by Bambu Lab or OrcaSlicer. Download free and print one tonight. The other four are in the Handyfab Christmas Pack 2026 collection. If you print one, please post a Make!