Sprig Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Decorate your console, use this 3d printed design to add a special style to your Sprig.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
Sprig Case
This is a custom designed sprig case made for the V1.1 Sprig Console. It has 4 printed parts, and is assembles with M2 screws and heat inserts.
I designed this to give me a challenge for something more applicable and complicated. I wanted to make something that had some more purpose.
Printing
None of the parts need support material to print.
There are overhangs/bridges that you should be aware of, they should print fine unless your printer is not that good, you may want to change the orientation if that's the case.
Assembly
BOM
Item | Qty | Details |
|---|---|---|
M2 Button Head | 6 | 12mm |
M2 Button Head | 2 | 4mm |
M2 Button Head | 2 | 6mm |
M2 Button Head | 4 | 16mm |
M2 Heat Insert | 8 | |
M2 Nuts | 4 |
Begin by placing the heat set inserts into all of the necessary holes.
Step 2:
Use the 6 M2x12mm screws to secure the button covers
Step 3:
Screw in the case on top of the TFT Display
This uses the 16mm Screws, and the Nuts
.
.
.
.
.
.
.
.
.
Step 4:
Screw in the Middle Section (This section is attached only with heat inserts so that it can be repeatedly taken on and off for battery replacements.
