Prusa Air 2 Production file
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently got access to a laser cutter, so I was pretty excited to try this out. Cutting it was a learning experience…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I recently got access to a laser cutter, so I was pretty excited to try this out. Cutting it was a learning experience in a few ways, but mostly about learning how to manipulate dxf files. The attached file is the file I used to do the cut. The box in blue is 2 feet by 4 feet, the size of the cutter I use.
Instructions
This is the Prusa Air 2 unmodified, I just pulled out all the unneeded info, put everything in the same layer and colour, and then printed.
On "my" cutter, I needed 5 passes at 100% power, 4% speed to get everything cut through, when I used the red 6mm acrylic.
Category: Other