iPhone Duo adapter for MCON Controller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perimeters: 4 Layer Height: .20 Infill: 100% Supports: No. Adjust the speeds for your printer to get a smooth bridge
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed an adapter for my iPhone Duo to use on the MCON controller. None of the models I found worked for me. I'm using this cheap case from Amazon which works amazingly well:
amazon.com/dp/B0HF3235QK?ref=ppx_yo2ov_dt_b_fed_asin_title
I designed an adapter to use 4 strips of 1/2" 3M double sided adhesive to stick to the back and to the main plate of the MCON itself. The front side has a slot to mount the MCON puck in landscape mode (right slot) and a slot to mount the MCON puck for portrait orientation (middle slot). There are 2 posts on the left hand side designed to hold the left hand side of the iPhone Duo up (so it doesnt just dangle in mid air). There are 2 spots for foam inserts to cushion the front of the display:
amazon.com/dp/B0FXWVPB44?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1
I tried to mount the duo without the case on this setup, but the case throws the height and alignement of everything off, so if you're trying to remix this for your case, or a naked iPhone Duo, adjust the 2 left posts accordingly. I thought about selling these premade with adhesives and foam installed for convenience, but i think there are too many variables with case thickness and personal preference on how people carry their iphone duos