VW Beetle/Bug (Type 1) fan velocity ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan velocity ring for VW Bug - replica of those used on '75-up FI shrouds. Doghouse and non-doghouse version.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
"Velocity Ring" for VW Beetle (Type 1/upright) fan shroud - intended to replicate the effect of the ones on the '75-up EFI fan shrouds. Versions for Doghouse and non-doghouse shrouds (though I've not tested the non-doghouse). My engine ran cooler after installing this, though I also installed thermostat flaps/shutters at the same time, so don't know how much is from this vs. that. At time of upload has been in place for 6 months and 2,500 miles, seems to be holding up okay.
Print with ABS or other heat-tolerant material - heat rises through the fan after engine shutdown. I printed lugs-down, ring on support material. Position on shroud, drill holes in shroud through holes in ring lugs, attach with sheet metal screws - ensure sheet metal screws are short enough to not rub on fan.
Created in FreeCad, I included FreeCad files if anyone wants to edit/experiment - if you come up with improved versions let me know.