Desktop Reference Sheet - Wall Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are holders for those desktop reference sheet holders that usually come attached to a 45 degree angled stand. I…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
These are holders for those desktop reference sheet holders that usually come attached to a 45 degree angled stand. I decided that the stand on my desk was taking up too much space, and since I only had a few sheets of paper in it anyway, I decided to move the few I needed on to the wall.
The holders are different depths, so the longer one goes at the bottom which makes the sheets tend to fall to the sides on their own. I used a couple of screws to attach mine to the wall. (Pro Tip: a level or plumb line is vital to get the holders perfectly vertical, on their own and to each other.)
Print Settings
Printer:
Prusa Mini
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
25%
Filament:
Inland PLA+
White
Notes:
Include some infill, just for strength. I have not tried them without any, and they don't need to support that much weight, so no infill may actually be fine.
Category: Office