VW Bug Beetle accelerator pedal roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Roller for stock VW Bug accelerator pedal. Use with 2x 608 bearings (and grease).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Accelerator pedal roller for my VW Beetle (stock pedal and arm). Original was missing on my car, PO had put piece of pipe over shaft but that was stiff, this is much smoother. Groove in roller fits ramp on accelerator pedal and matches stock roller diameter. Has been on my car for about 4 years and 23k miles, still working well.
Print bushing and roller. Assemble with 2 608 bearings, center bushing is because bore of bearings is bigger than shaft. Slide onto shaft, attach with circlip/e-clip. Grease copiously. Adjust throttle cable as needed.
Designed in Autodesk Inventor which I no longer have, so I can't edit it (but could provide the files for someone who does).