Django Reinhardt hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gypsy jazz extraordinaire
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As with all hueforges, no mmu is needed!
Project: django.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 151.74x160mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.95438mm
Filaments Used:
#000000 PLA+ Esun Black Transmission Distance: 0.1
#453a71 PLA Prusament Galaxy Purple Transmission Distance: 4
#25d4d6 PLA Prusament Azure Blue Transmission Distance: 4.5
#ffffff PLA Polymaker Polysonic White Transmission Distance: 6.2
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Galaxy Purple
At layer #13 (1.12mm) swap to Azure Blue
At layer #17 (1.44mm) swap to Polysonic White for the rest.