1 / 21
Nissan 370Z Double-DIN Head Unit Bezel — zdjęcie 1
1 / 21

Nissan 370Z Double-DIN Head Unit Bezel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A direct replacement for the factory cubby that lets you install a shallow-depth double-DIN head unit (shown: Pioneer DM

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Fit
Tested on: 2020 Nissan 370Z 50th Anniversary Edition (Bose, no navigation)
Should fit other 370Z model years (untested)
Requires a shallow-depth double-DIN head unit
Result: solid, no wiggle, no rattle, no fitment issues

Hardware (6 screws)
Pan head screws, about 1 inch long, #6 or #8 [verify]
4 screws secure the head unit to the bezel (2 per side)
2 screws secure the bezel to the factory trim (1 per side, at the factory mounting points above the A/C vents)

Print settings
Printer: Creality K1 Max (enclosed)
Material: ASA (Polymaker, Jet Black or Galaxy Black)
Nozzle: 0.4 mm | Layer height: 0.2 mm
Nozzle temp: 250-260 C (start at 255) | Bed: 100-105 C
Speed: 150-200 mm/s, outer walls 100 mm/s
Part fan: off for the first 3 layers, then 10% max. Aux and chamber fans off.
Infill: Grid 15%, or Gyroid 40% for extra strength (not required)
Supports: required
Orientation: upright, as exported
Print time: about 12 hours (Grid 15%) or about 16 hours (Gyroid 40%)

Finishing (optional)
Acetone smoothing softens layer lines, but leaves a glossy finish.
For a smooth paint-ready finish: acetone smoothing, sand 80/120/400 grit, filler primer, wet sand, Bondo body filler, wet sand again, then three coats of spray paint. It takes patience but looks great.
Acetone is flammable and the fumes are harmful, so work outdoors or with strong ventilation.

Notes
The lower supports in this design are thin and may snap during install. It installs solid without screwing them in, so they're optional.

Files and license
3MF and STL included.
Source and updates: github.com/50thZ/370z-3d-prints
CC BY-SA 4.0. Credit 50th Z and share remixes under the same license.

Independent project, not affiliated with Nissan. Provided as-is. Check fitment before installing.

Tagi