SPAM Can Divider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hey I ate the yummy SPAM, and now what do I do with the cool can it came in?!? Here's a handy SPAM can divider to…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 74
- Wydruki
- 2
- Wyświetlenia
- 540
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Hey I ate the yummy SPAM, and now what do I do with the cool can it came in?!?
Here's a handy SPAM can divider to organize your stuff. Two versions have been included. A 4 section divider as pictured, and one that just includes the outer shell so that you can add your own partitions as you see fit.
FYI. This is a really tight fit, and it sits below the can's lid lip, so don't expect it to come back out once you have it inserted in the can.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament:
Generic PLA
Notes:
I used a brim to make sure that the filament was flowing and to make sure the base was anchored to the build plate.
Category: DIY