Nissan 370Z Lower Storage Box with Flip-Down Door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A storage compartment with a magnetic door for the lower stack. The door is a separate print, with or without a Z emblem
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 1
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Fit
Made for the Metra 99-7607B dash kit (Metra "Dash Kit for Select 2009-2020 Nissan 370Z DIN/DDIN, Black", for cars without factory nav). It will NOT fit the factory dash opening.
Tested: 2020 370Z 50th Anniversary Edition (Bose, no nav)
Other 2009-2020 non-nav cars: should fit, untested
Pairs with my radio bezel:
Want no door? See the open box: [link]
Hardware
2x #8 x 3 in. star-drive trim-head FINISH screws (attach the door). Must be #8 finishing screws. Other sizes won't work. They were the smallest I found that give enough tension to hold the door open.
4x 6 mm x 2 mm round magnets, glued into the box cavity and the door. Check polarity before gluing.
Self-adhesive felt (optional, stops rattles)
The screw-head recess may need hollowing out slightly. Some of my prints needed it, some didn't. Test-fit first.
Print settings
Creality K1 Max, Polymaker ASA (Jet Black), 0.4 nozzle, 0.2 layer, 250-260 C nozzle / 100-105 C bed, Grid 15% infill. Don't use the stronger ASA profile; it isn't needed. Supports: yes. Orientation: default. About 16-18 h total.
Tip: slice the cavity in half, print the two sections, then join them with glue or tape around the outside.
Finishing
Unfinished black ASA. Shine in photos is lighting.
Files and license
Print-ready: box and curved Z door (separate files).
STEP source for all variants, including flat door and flat no-Z door, on GitHub: github.com/50thZ/370z-3d-prints
CC BY-SA 4.0. Independent project, not affiliated with Nissan.
"Nissan", "370Z" and the Z emblem are Nissan trademarks, used only to describe compatibility. Provided as-is.