Extra Battery/Counterweight Mount for Quest 2 Battery Strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple way to mount an 13Ah Anker "pillow" battery on the Quest 2 Battery Strap. It provides longer play-time and…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution
A simple way to mount an 13Ah Anker "pillow" battery on the Quest 2 Battery Strap. It provides longer play-time and acts as a counter weight.
You will need 5 M6x1 screws. 10mm long screws should work but at least one of them should be nylon so it does not scratch your battery.
I recommend running an M6x1 tap through the treads if you have one, if not at least screw in a metal screw before trying a nylon screw.
You can lean the battery towards your head, or away from it.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.26
Infill:
4 shells and 20% infill
Filament: Up to you PLA or PETG Up to you
Notes:
You need supports, but just under the screw boss on the battery ring. You don't want supports inside the holes.
Category: Gadgets