Oculus Quest Counterweight/Battery-Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a heavy-duty battery holders for the Oculus Quest 1. AUKEY USB C 10K version has battery opening that is…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution
This is a heavy-duty battery holders for the Oculus Quest 1.
- AUKEY USB C 10K version has battery opening that is 75.5mm x 14.5mm.
- XT Power 20K version has a battery opening that is 84mm x 22mm with an 11mm radius on the ends.
- The Anker 10K version has a battery opening that is 80.75mm x 22.75mm with an 11.375 mm radius on the ends.
It holds the battery securely and is comfortable and stable.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.25
Infill:
25% with 4 shells for strength
Notes:
If you print using larger layer-heights than 0.25, you will need to work on the threads a lot.
I recommend sanding the screws and running a M6x1 tap through the holes. (Or metal M6x1 screw that has notch ground along its length.)
Category: Video Games